Products

DESCRIPTION The Ambient Temperature Probe provides accurate temperature readings in hot and cold environments. Easy to mount inside of a oven or grill with our grill clips (sold separately). SANT311T Probe type: Thermistor.  Probe Temperature Range: 0 to 572°F (-18 to 300°C).  Specifications: 6 ft. cable, 2.5mm audio connector, 2 1/4 in. long probe, 4mm. diameter.

Ball Valve Adapter Use the Ball Valve Adapter to install the FireBoard Drive Blower to your cooker. Many popular drum smokers and cabinet smokers have ball valve fittings already installed, allowing easy fan installation with this adapter. Using commonly found thread reducers or enlargers, this adapter can be mounted to almost any standard pipe threading. To install, use the sliding rails on the Drive Blower to fit through the slots on this adapter and tighten the thumb screws. Adapter threading and dimensions: 1″ NPT thread type 2.5″W  x 2″L x 1.5″H Suits G2 Blowers Only

FireBoard Ball Valve Adaptor - G3 Blower Use the G3 Ball Valve Adapter to install the FireBoard Drive Blower G3 to your cooker. Many popular drum smokers and cabinet smokers have ball valve fittings already installed, allowing easy fan installation with this adapter. Using commonly found thread reducers or enlargers, this adapter can be mounted to almost any standard pipe threading. To install, remove the adapter plate tab and replace with the ball valve adapter. Then secure with the thumb screw and nut. Note that this ball valve adapter is not compatible with the original Drive Blower G2.

FireBoard Battery Pack 10000mAhExtend your battery life by using this 10,000 mAh battery pack. Rechargeable via USB-C/Micro USB. USB Power Delivery enabled, which allows higher voltage output to FireBoard2 devices. The battery pack will keep the battery charged (or recharge the battery) while simultaneously providing power to support fan Drive. FireBoard 2, FireBoard 2 Drive, FireBoard 2 Pro – supports 100% fan speed via USB-C. FireBoard (Gen 1) – support approx. 40%-50% fan speed via Micro USB.

LAST AVAILABLE STOCK WORLDWIDE! Click HERE for the last remaining Bronco & Pit Barrel Fan Adaptors to suit this blower. Powerful blower that can be installed on many smokers using the included adapter plates. Built-in sliding damper to fine-tune airflow. Small/Medium Adapter Plate: 2.75 x 1.97″ (70 x 50mm) Large/XL Adapter Plate: 3.43 x 3.03″ (87 x 77mm) Specifications: Variable Speed, powered by FireBoard’s internal battery ** Power source: 12 VDC, 0.68A, 8W (not included) Cable length: 4.5 ft (1.4 m). Power connector: 2.5 mm barrel plug Blower maximum flow rating: 20 CFM Blower opening: 1.2 x 1.6″ (30 x 40 mm). Flange outer dimension: 1.95 x 2.45″ (49 x 62 mm). Flange mounting hole distance: 1.32 x 2.05″ 34 x 52 mm, hole size, 3 mm in diameter. Note: FireBoard no longer produce the fan control cable. You must use this blower in conjunction with a FireBoard Drive Or Pro. ** For maximum fan speed, external power is required.

Fireboard Blower G3 Introducing the new FireBoard Drive Blower G3, featuring a streamlined design for greater performance and durability. Like the previous 20 CFM model, the G3 model is a powerful blower that can be installed on many smokers using included adapter plates. This blower also includes a built-in rotating damper to fine-tune airflow. Small/Medium Adapter Plate: 2.75 x 1.97″ (70 x 50mm) Large/XL Adapter Plate: 3.43 x 3.03″ (87 x 77mm) Specifications: Braided stainless steel cable High heat-resistant Edge blower fan High heat-resistant molded cover Stainless steel frame and hardware Maximum flow rating: 20 CFM Connector plug: 2.5mm ID Cable length: 4.5ft (1.4m) Power source: 12VDC, 0.68A, 8W Operates with all Drive-enabled FireBoard models Important: Blower does NOT include Drive Fan Control Cable, which is needed to use a fan with the FireBoard 2 or FBX11. FireBoard 2 Drive/Pro models will power fan directly, no Drive Fan Control Cable necessary. The G3 model uses a new Drive G3 Ball Valve Adapter and is not compatible with the previous adapter. However, the Drive Blower Nozzle Adapter is compatible with both blower models. Please review the specifications and measure your cooker’s vent size to determine compatibility. View a compatibility chart for some models here. ** For maximum fan speed, external power is required.

FireBoard Cold Storage Ambient Probe Use this probe for monitoring cold storage or ambient room temperatures. The 10K thermistor probe built with a 20′ wire is also easy to splice and extend, and additional lengths of 100s of feet can be added without any impact to temperature accuracy. Probe type: 10K Thermistor. Probe Temperature Range: -58 to 248°F (-50 to 120°C). Specifications: 20 ft. cord, 2.5mm audio connector, 1 in. long probe, 4mm. diameter.

FireBoard Competition Series Probe 1" S The 1″ (28mm) SF628T Competition Series probe is the perfect choice to get precise readings in smaller cuts of meat or where space is limited. The shorter size makes this a great choice for ribs, brisket, fish, and more! Probe type: 100K Thermistor. Probe Temperature Range: 0 to 572°F (-18 to 300°C). Specifications: 6 ft. cable, 28mm (~1″) long probe, 1.8mm (1/16″) diameter.

FireBoard Competition Series Probe 3" The SF675T 3″ (78mm) Competition Series Food Probe is the perfect choice to get precise readings in smaller cuts of meat or where space is limited. Probe type: 100K Thermistor. Probe Temperature Range: 0 to 572°F (-18 to 300°C). Specifications: 75mm (~3″) long probe, 1.8mm (1/16″) diameter.

FireBoard Competition Series Probe 6pk Competition Series probes are the perfect choice to get precise readings in smaller cuts of meat or where space is limited. This 6 pack features four (4) SF675T and two (2) SF628T competition probes, giving you a variety of options to use with your FireBoard SF675T: Probe type: 100K Thermistor. Probe Temperature Range: 0 to 572°F (-18 to 300°C). Specifications: 75mm (~3″) long probe, 1.8mm (1/16″) diameter. SF628T: Probe type: 100K Thermistor. Probe Temperature Range: 0 to 572°F (-18 to 300°C). Specifications: 28mm (~1″) long probe, 1.8mm (1/16″) diameter.

Fireboard 650ml Clear Cups Check out these fun FireBoard Cups, perfect size and wide enough not to tip over.  We had these made for major events such as the American Royal but due to popular request, we decided to sell them.  Sold as a set of 6. Kansas City skyline printed around the cup, made in Lenexa, Kansas by Churchill Container Corp!

FireBoard Food Probe - Thermistor The SF311 and SF311T Food Temperature Probe provides accurate temperature readings in meat and food, and can easily be inserted with the sharp tip. SF311T: Probe type: 100K Thermistor. Probe Temperature Range: 0 to 572°F (-18 to 300°C). Specifications: 6 ft. cable, 5 in. long probe, 90° angle, 4mm. diameter.

Probe Clip for mounting to the side of a pot/kettle – fitting 4mm diameter probes (SV311, SANT311, SA311, SF311).

FireBoard Nozzle Adapter FireBoard Drive Blower nozzle adapter for kettle style smokers and grills. The Blower Nozzle Adapter allows easy installation of the FireBoard Drive Blower on kettle style grills and smokers.  The square nozzle rotates and can redirect airflow in any direction perpendicular to the fan.  This is particularly useful in situations where a custom hole is drilled in the side of a grill in order to install a fan to control the fire. Included gasket insert allows users to seal vent between uses. Comes with square nozzle, adapter face with built-in gaskets and insert, and screw for installation. Specifications: Outer Adapter Plate with Gasket Dimensions: 2.75” x 2.75” (69.85mm x 69.85mm) Dimensions of the opening of the Adapter Plate with Gasket: 1.6” x 1.2” (40.64mm x 30.48mm) Nozzle Opening Dimensions: 1.43” x 0.78” (36.32mm x 19.81mm) Silicone Gasket Temperature Range: -100F to 500FSee the installation process here: https://youtu.be/_H-M7zccTN4 Suits G2 and G3 Blowers