FireBoard Temperature Control

Fireboard Blower G3 Introducing the new FireBoard Drive Blower G3, featuring a streamlined design for greater performance and durability. Like the previous 20 CFM model, the G3 model is a powerful blower that can be installed on many smokers using included adapter plates. This blower also includes a built-in rotating damper to fine-tune airflow. Small/Medium Adapter Plate: 2.75 x 1.97″ (70 x 50mm) Large/XL Adapter Plate: 3.43 x 3.03″ (87 x 77mm) Specifications: Braided stainless steel cable High heat-resistant Edge blower fan High heat-resistant molded cover Stainless steel frame and hardware Maximum flow rating: 20 CFM Connector plug: 2.5mm ID Cable length: 4.5ft (1.4m) Power source: 12VDC, 0.68A, 8W Operates with all Drive-enabled FireBoard models Important: Blower does NOT include Drive Fan Control Cable, which is needed to use a fan with the FireBoard 2 or FBX11. FireBoard 2 Drive/Pro models will power fan directly, no Drive Fan Control Cable necessary. The G3 model uses a new Drive G3 Ball Valve Adapter and is not compatible with the previous adapter. However, the Drive Blower Nozzle Adapter is compatible with both blower models. Please review the specifications and measure your cooker’s vent size to determine compatibility. View a compatibility chart for some models here. ** For maximum fan speed, external power is required.

LAST AVAILABLE STOCK WORLDWIDE! Click HERE for the last remaining Bronco & Pit Barrel Fan Adaptors to suit this blower. Powerful blower that can be installed on many smokers using the included adapter plates. Built-in sliding damper to fine-tune airflow. Small/Medium Adapter Plate: 2.75 x 1.97″ (70 x 50mm) Large/XL Adapter Plate: 3.43 x 3.03″ (87 x 77mm) Specifications: Variable Speed, powered by FireBoard’s internal battery ** Power source: 12 VDC, 0.68A, 8W (not included) Cable length: 4.5 ft (1.4 m). Power connector: 2.5 mm barrel plug Blower maximum flow rating: 20 CFM Blower opening: 1.2 x 1.6″ (30 x 40 mm). Flange outer dimension: 1.95 x 2.45″ (49 x 62 mm). Flange mounting hole distance: 1.32 x 2.05″ 34 x 52 mm, hole size, 3 mm in diameter. Note: FireBoard no longer produce the fan control cable. You must use this blower in conjunction with a FireBoard Drive Or Pro. ** For maximum fan speed, external power is required.

Introducing the FireBoard Ring, our first Drive-enabled appliance. Designed for use with 22″ Weber kettle grills paired with a Drive-enabled FireBoard device, the FireBoard Ring enables your kettle to do more than ever before. HOW IT WORKS Drive-powered fan control using radial air flow distribution FireBoard Ring connects to a Drive-enabled FireBoard device to distribute air flow throughout its circular enclosure. Then, air is pushed vertically down into the kettle grill body via small holes along the bottom of the Ring. The generated heat is then distributed via a ceramic diffuser plate, creating an efficient and homogenous environment perfect for low-and-slow smoking. GRILL GRATE REAL ESTATE Maximize available cooking space Other products that turn kettles into smokers often require the user to sacrifice grate space to function. The Ring sits around the rim of the kettle so that you have all the space you need. MORE VOLUME + MORE INSULATION = MORE EFFICIENT Get more out of each cook Because of the Ring’s even air circulation and secure fit, your kettle becomes highly fuel-efficient. Refuel less, grill more. If you like it, then you should put a Ring on it. Replacing your kettle grill with a professional smoker requires significant time and resources. With the Ring, you can get the same (or better) results at a fraction of the cost – without the teary goodbyes. The Ring has been extensively tested with the kettle grills listed in this chart. If you don’t see your 22″ model on the list, that doesn’t necessarily mean the Ring won’t work for you. Kettle grills come in all shapes and sizes, so use best judgment with this list as a reference. Note: FireBoard Thermometer Sold Separately